Hot-max-torches HM8000 Manuel d'utilisateur télécharger pdf (Page 12)

KDAR Company 11

Transporting/Storage

Preparing for Transportation

1. Turn the engine switch and fuel valve to the

off or stop position.

2. Let the engine cool before transporting.

3. Keep the generator level to prevent fuel spill-

age.

4. Take care not to drop or strike the generator

when transporting.

5. Do not place heavy objects on the generator.

Preparation for Storage

1. Be sure the storage area is free of excessive

humidity and dust.

2. Preparation will depend on the length of time

the generator will be stored as outlined below.

Less than 1 Month

 No preparation necessary.

1 to 2 Months

 Fill with fresh gasoline.

 Add fuel stabilizer to the gasoline.

2 Months to 1 Year

 Fill with fresh gasoline.

 Add fuel stabilizer to the gasoline.

 Drain the carburetor float bowl.

 Drain the fuel sediment cup.

1 Year or More

 Fill with fresh gasoline.

 Add fuel stabilizer to the gasoline.

 Drain the carburetor float bowl.

 Drain the fuel sediment cup.

 Remove the spark plug and put one ta-

blespoon of clean engine oil into the

cylinder. Turn engine slowly with the

pull rope to distribute the oil and rein-

stall the spark plug.

 Change the engine oil.

 After removal from storage, drain the

stored gasoline into a suitable container

and fill with fresh gasoline before start-

ing.

Drain Carburetor

1. Loosen the carburetor drain screw.

2. Drain carburetor into a suitable container.

3. Replace drain screw.

WARNING

 Gasoline is extremely flammable and

is explosive under certain conditions.

 Do not smoke or allow flames or

sparks in the area when the carbure-

tor is being drained.

 Be careful not to spill fuel when

draining the carburetor. Spilled fuel

or fuel vapor may ignite.

 Avoid fuel contact with the skin or

breathing vapors for a prolonged pe-

riod.

 KEEP FUEL OUT OF THE REACH

OF CHILDREN.

Carburetor

Drain Screw

Internal Oiling

1. Remove the spark plug.

2. Pour 1 tablespoon of clean engine oil into the

cylinder.

3. Crank the engine several times by pulling on

the starter rope.

4. Reinstall the spark plug.

5. Slowly pull the starter rope until resistance is

felt. At this point the piston is coming up on its

compression stroke and both the intake and

exhaust valves are closed. Storing the engine in

this position will help protect it from internal

corrosion.

1 2 ... 7 8 9 10 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire

Hot-max-torches HM8000 Manuel d'utilisateur Page 12

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Hot-max-torches HM8000